Rapport II Pro CCTV Multifunction Test Unit

NEW

Rapport II Series

Style and unique functionality have been combined in the new Rapport II Series, a set of two installation and troubleshooting tools for CCTV professionals who wish to utilise their work effectively at a price they can afford.

The Rapport II and the Rapport II Pro are two stylish, flip-top units that combine the most useful functions needed for testing CCTV installations. Distributed by ACT Meters Ltd, each unit incorporates a 3.5” colour LCD monitor, video signal generator, digital multimeter, PTZ controller, PTZ protocol analyser and UTP cable tester.

The Rapport II Pro has the extra function of a built-in MPEG4 digital video recorder which allows users to store video images on a SD card which can then be downloaded to a PC for future reference. Please note, the Rapport II Series has replaced the Rapport 337 which is no longer available.

Functions

• Colour CCTV Field Monitor
The 3.5” colour TFT-LCD monitor supports both PAL and NTSC video signal format. The display video signal level (IRE) is helpful in checking the video quality, brightness and contrast control.

• Video Signal Generator
The output colour bar – red, blue and green – screen allow technicians to inspect the video monitor or DVR. This too supports PAL and NTSC video signal formats.

• Digital Multimeter
Combines a voltmeter, ohmmeter and continuity tester.

• CCTV PTZ Controller
Controls and programs a variety of speed and slow done cameras. It has multi protocol and programmable baud rates.

• PTZ Protocol Analyser
Determines which protocol is used to control PTZ cameras from a PTZ controller or DVR. This will guide the installer to understand the protocol and find the fault device easily.

• UTP Cable Tester
Specified to quickly test UTP cables for continuity, mis-wiring and polarization. By using an attached remote terminator, the installer can easily test the cable before or after the cable is installed.

• Digital Video Recorder (Rapport II Pro)
Built-in MPEG4 digital video recorder which allows users to store video images on a SD card which can then be downloaded to a PC for future reference. Maximum 10 minutes/8 files.

Included Accessories

• Portable bag
• Power Adaptor: AC100 ~ 230V input, DC 12V, 1A out
• SD Card: 1GB card
• Adjustable necklace
• BNC to BNC cable: 1.2m coaxial
• Test leads
• UTP Test Terminal

Specifications

Input Voltage: 12V ± 10%, above 1.2A
Battery: Lithium Polymer Battery (Inner Packaging)
Built-in Charger/ Charge time: More than 6 hours
Operational Time: More than 4 hours
Signal System: NTSC/PAL
Video Level: 1 Vp-p, 140 IRE
Protocol: Multiple
Transmission Speed: 2400bps ~ 38400bps
Transmission Mode: RS-422, RS-485
UTP Cable Tester: Continuity/Crossed cable and breaks or short circuits
Multimeter AC Voltage: Max 400V
Multimeter DC Voltage: Max 400V
Multimeter Resistance: Max 40 MΩ
Multimeter Continuity: Beeper activated when resistance falls below 20Ω

RAPPORT II PROTOCOLS

VCLTP, VC2500, PELCO-D, PELCO-P, KTL-ASC, KTL-DIGI, YUJIN-PD, WONWOO, WV-CS850, FASTRAK, SPD-2500, SCC-643, SUPREMACY, AD RS422, SJ-100, SJ-1000, DYC, DY-SP360D, DY-255RXC, ORX-1000, VICON, LG MULTI

BAUD RATES
2.4/4.8/9.6/19.2/38.4

Website Special Price

Trade price for the ACT Rapport II is £359.00 but here on this website you can purchase it for £305. Trade price for the ACT Rapport II Pro is £430.00 but again, you can purchase it from this website for £365.00. This is an exclusive web offer only. Remember, all prices shown on this website exclude VAT.